The project began on October 25, 2023, with a clear plan to progress through 11 key milestones before its completion on March 1, 2025. Each milestone focuses on different stages of development, covering hardware design, software development, system integration, and testing. This structured approach ensures steady progress and the successful delivery of the project's goals.
54%
Fully developed
36%
In progress
10%
Left
Below is a detailed overview of the milestones and their current stages of progress
Project started
25. October 2023.
Milestone1
Create firmware and GUI with minimal set of functionalities in order to etablish communication between them over Ethernet
Done
Finished:
05.12.2023
Started:
01.11.2023
Milestone 2
Expand firmware and GUI functionalities to support device control over Ethernet
Done
Finished:
03.03.2024
Started:
08.01.2024
Milestone 3
Develop a board with power and current sensing circuit that will be used as shield for STM board. This board will be used for prototyping and testing overall hardware functionalities
Done
Finished:
01.11.2023
Started:
05.12.2023
Milestone 4
Expand firmware and GUI functionalities to support real-time data streaming
Done
Finished:
05.06.2024
Started:
11.02.2024
Milestone 5
Expand logic of previosly developed board to support full set of functionalities. This board will be used to test hardware
Done
Finished:
08.04.2024
Started:
11.02.2024
Milestone 6
Write software for MCU that will be used a system load. This MCU will consume power and generate different load profiles. Based on obtained load profiles, emulation will be done using DAC and programmable load. Write PCB bringup software. Implement application plugin that will enable offline data analysis.
Done
Finished:
09.11.2024
Started:
11.08.2024
Milestone 7
Develop and implement energy debugging functionalities inside firware and GUI to enable energy profiling of third party MCUs.
In progress
Started:
19.09.2024
Milestone 8
Design and manufacture PCB for previosly designed prototype that will be used as standalone Arduino shield
In progress
Started:
26.11.2024
Milestone 9
Enable full support for EEZ functionalities
In progress
Started:
31.05.2024
Milestone 10
Manufacture full PCB
Not started
Milestone 11
Write project documentation and product web page
In progress
Started:
01.11.2024
Estimated end of the project
01. March 2025.
Partners
